Quantity in Basket:
Shipping Weight: 0.25 pounds
Banjo fitting kit for coolant (water) ports on Garrett ball bearing GT25, GT28, GTX28, GTX29, GT30, GTX30, GT35 and GTX35 series turbochargers. Also compatible with Garrett ball bearing GTW34, GTW36, and GTW38 series turbochargers.
14mm Banjo to -6AN Male flare.
|ATP-FTG-003||Banjo Fitting Kit for coolant lines - 14mm Machined Alum to 1/4" NPT||$22.00|
|ATP-FTG-002||Banjo Fitting - 14mm banjo to 1/4" NPT (Banjo Only)||$14.00|
|ATP-FTG-004||14mm Banjo Fitting Set for coolant lines - 3/8" (10mm) Barb||$18.00|
|ATP-FTG-012||Fitting, Metric 14mm to 6AN, Male to Male (For coolant or oil)||$14.95|
|ATP-FTG-023||Steel braided Hose, -6 AN, for coolant or oil use, 12 inches long||$32.00|
|ATP-FTG-024||Steel braided Hose, -6 AN, for coolant or oil use, 6 inches long||$28.00|
|ATP-FTG-028||Steel braided Hose, -6 AN, for coolant or oil use, 24 inches long||$38.00|
|ATP-FTG-050||Banjo Bolt, 14mm x 1.5 pitch w/ 2 crush washers||$9.95|
|ATP-FTG-052||ALUM Banjo Fitting, 14mm hole (for 14mm bolt) with -6 AN male flare.||$19.95|