Garrett GT3071R Turbo Ball Bearing Turbo WITH Turbine Housing Options
Quantity in Basket:
None
Code:
GRT-TBO-020
Price:
$1,649.00
Shipping Weight:
3.00 pounds
Turbo is the newest addition to
the Garrett Ball Bearing Line up. It fills in the requirements for small displacement
4 cyl. engines and has a excellent response characteristics. It spools up 1,000
RPM sooner than the older GT30R. Compressor
housing is T04E frame size with 2.00 outlet. Compressor inlet is available with 2.75 or 4.00 inlet. Standard (default) turbine housing is first one listed (T3 inlet with 3" 4 bolt "GT" conical discharge flange) and various other turbine housing options are available for easy retrofit into applications where your turbine housing type is already dictated by your current turbo. Please note: Turbine housing choice will determine final calculated cost of turbo in the shopping basket.
Turbine
-Wheel: 60mm w/ 84 trim
-Housing: .63 ar, .82 ar, 1.06 ar
-Maps
Compressor
-Wheel: 71mm w/ 56 trim
-Housing: .50 ar
-Maps
This unit is usually in stock and ships withing 1-2 days.
This is the full size GT3071R with the full size 60mm turbine wheel which is the same turbine wheel found on the full size GT3076R.
Applicable Garrett P/N's:
700177-5022S
700177-5023S
700177-0023
700177-5023
700177-23
Note: There are two other GT3071R variants that have smaller versions of the turbine wheel (56.5mm) made to fit into the T25/GT28 style internally wastegated exhaust housings. Those are identified as "GT3071R-WG" units.
|
Code
|
Name
|
Price
|
|
|
ATP-FLA-010
|
Aluminum - Oil Drain ( return ) Flange (GT25, GT28, GTX28, GTX29, GT30, GTX30, GT35, GTX35, T25, T28
|
$13.95
|
|
ATP-WGT-009
|
Internal Wastegate Actuator Bracket
|
$25.00
|
|
GRT-GSK-008
|
Oil Drain ( Return ) Flange Gasket - GT GTX Series GT25 through GTX35 and G25 G30 G35
|
$3.00
|
|
ATP-FTG-003
|
Banjo Fitting Kit for coolant lines - 14mm Machined Alum to 1/4" NPT
|
$26.95
|
|
ATP-OIL-021
|
-4 size Oil inlet fitting for GT28 GTX28 GT30 GTX30 GT35R G25 G30 G35 w/ built-in .035" RESTRICTOR
|
$12.00
|
|
ATP-FTG-004
|
14mm Banjo Fitting Set for coolant lines - 3/8" (10mm) Barb (common size)
|
$18.00
|
|
ATP-FTG-012
|
Fitting, Metric 14mm to -6AN, Male to Male (For coolant or oil) GT/GTX28 30 35 G Series
|
$14.95
|
|
ATP-WGT-019
|
Internal Wastegate Actuator WITH ROD END - Special 7 psi
|
$116.12
|
|
ATP-OIL-031
|
Alum 5 Degree Tilt Oil Drain Tube - GT25/GT28/GT30/GT35 GX28 GTX30 GTX35 G Series, 5/8” hose barb
|
$29.00
|
|
ATP-WGT-025
|
Wastegate Actuator with ROD END, 28RS style, 14 PSI, double bent rod, GT/GTX all
|
$116.12
|
|
ATP-FTG-029
|
-4 size Oil inlet fitting for T25/T28 or unrestricted GT25R/GT28R/GT30R/GT35R
|
$8.50
|
|
ATP-FTG-054
|
UNRESTRICTED Banjo style low profile -4 AN oil feed kit, incl. bolt, GT25 GT28 GTX28 GT30/35 GTX35
|
$24.95
|
|
ATP-FTG-055
|
Low profile -3 OIL FEED LINE Kit for GT25R through GT35R turbos (with 48" -3 line)
|
$49.00
|
|
GRT-GSK-005
|
Gasket, T3 Turbine Inlet - UNDIVIDED
|
$6.95
|
|
GRT-GSK-003
|
Gasket, T4 ( T04 ) Turbine Outlet (4 Bolt round) - Common on "On Center" Housings
|
$15.45
|
|
ATP-GSK-019
|
Gasket for T3 5 Bolt (Ford Style) Turbine Outlet Flange (Externally Gated)
|
$9.00
|
|
ATP-GSK-012
|
Gasket, "T31" 4 Bolt Turbine Discharge Downpipe Gasket aka 2.5" 4 bolt
|
$8.00
|
|
ATP-GSK-015
|
Gasket, T3 Turbine Inlet, DIVIDED
|
$9.00
|
|
ATP-GSK-075
|
Stainless Steel Gasket - Garrett T3 Flanged, 5 bolt "GT", & Internally Gated Turbine Housing
|
$9.95
|
|
GRT-GSK-006
|
Gasket, T4 (T04) Turbine Inlet - UNDIVIDED
|
$8.00
|
|
GRT-GSK-004
|
Gasket, T25/GT25 Turbine Inlet for GT25 GT28/GTX28
|
$6.95
|
|
ATP-GSK-016
|
Gasket, 5-Bolt for Garrett T25 Flanged GT28 GTX28/2930R-WG Turbine Housings
|
$6.95
|
|
ATP-GSK-014
|
Gasket, T4 (T04) Turbine Inlet - DIVIDED
|
$8.95
|
