Quantity in Basket:
Shipping Weight: 0.25 pounds
Oil Feed line assembly Hyundai Coupe 2.0T (2010 to 2012 model years) comes with banjo and -4 oil feed line. Uses the stock banjo bolt.
Compatible with Hyundai Genesis Coupe 2.0T, model years 2010 to 2012 only
-The banjo fitting goes into the engine side and connects to the reused factory banjo bolt at the engine.
-One end of the supplied steel braided oil feed line connects to -4 AN at that banjo.
-The other end of the oil feed line goes to the turbo. However, depending on the turbo model that you are using, you will have to convert the oil feed port on that turbo to a -4 AN male to accept the oil feed line.
-Example: Product code: ATP-OIL-021 is required at the oil feed port on any GT/GTX 28 through 35 turbo
Product code: ATP-FLA-020 is required at the oil feed port on most journal bearing T3/T4 turbo.
Product code: ATP-FTG-044 is required at the oil feed port on the factory stock HGC turbo.
All three of these parts are listed below under "related parts" so you can add to your basket:
|ATP-OIL-021||-4 size Oil inlet fitting for GT28 GTX28 GT30 GTX30 GT35R with built-in .035" RESTRICTOR||$12.00|
|ATP-FLA-020||Oil Feed Flange with -4 Male Flare (T3, GT37, GT40, GT42, GT45, GT47, GTX50, GT55)||$14.95|
|ATP-FTG-044||10mm (1.25 Pitch) to -4AN Flare Fitting||$16.00|
Back to Top
All contents © 1997- Advanced Tuning Products, Inc. All rights reserved.