The "Go To" Source For Turbo Kit Builders!
|SAME DAY SHIPPING ON MOST ORDERS!!!|
The one and only dual Ball Bearing GT3076R Turbo assembly (Garrett P/N: 700382-5012) with turbine housing of your choice. T04E frame size compressor housing with 4"
inlet and 2". Very Good response turbo for 4 Cyl applications.
This turbo has a flow capacity of about over 500HP. This turbo would be the same
as HKS GT3037. Standard (default) turbine housing is first one listed (T3 inlet with 3" 4 bolt "GT" conical discharge flange) and various other turbine housing options are available for easy retrofit into applications where your turbine housing type is already dictated by your current turbo. Please note: Turbine housing choice will determine final calculated cost of turbo in the shopping basket.
-Wheel: 60mm w/ 84 trim
-Housing: .63 ar, .82 ar, 1.06 ar
-Wheel: 76.2mm w/ 56 trim
-Housing: .60 ar
This unit is usually in stock and ships withing 1-2 days.
|ATP-FLA-010||Aluminum - Oil Drain ( return ) Flange (GT25, GT28, GTX28, GTX29, GT30, GTX30, GT35, GTX35, T25, T28||$13.95|
|ATP-WGT-009||Internal Wastegate Bracket||$25.00|
|GRT-GSK-008||Oil Drain ( Return ) Flange Gasket - GT GTX Series GT25 through GTX35 and G25 G30 G35||$3.00|
|ATP-FTG-003||Banjo Fitting Kit for coolant lines - 14mm Machined Alum to 1/4" NPT||$22.00|
|ATP-OIL-021||-4 size Oil inlet fitting for GT28 GTX28 GT30 GTX30 GT35R G25 G30 G35 w/ built-in .035" RESTRICTOR||$12.00|
|ATP-FTG-004||14mm Banjo Fitting Set for coolant lines - 3/8" (10mm) Barb (common size)||$18.00|
|ATP-FTG-012||Fitting, Metric 14mm to -6AN, Male to Male (For coolant or oil) GT/GTX28 30 35 G Series||$14.95|
|ATP-WGT-019||Internal Wastegate Actuator WITH ROD END - Special 7 psi||$93.48|
|ATP-OIL-031||Alum 5 Degree Tilt Oil Drain Tube - GT25/GT28/GT30/GT35 GX28 GTX30 GTX35 G Series||$29.00|
|ATP-WGT-025||Wastegate Actuator with ROD END, 28RS style, 14 PSI, double bent rod, GT/GTX all||$93.48|
|ATP-FTG-029||-4 size Oil inlet fitting for T25/T28 or unrestricted GT25R/GT28R/GT30R/GT35R||$8.50|
|ATP-FTG-053||Banjo Fitting Kit, (1) ALUM Banjo fitting 14mm hole (for 14mm bolt) with -6 AN male flare||$29.90|
|ATP-FTG-052||ALUM Banjo Fitting, 14mm hole (for 14mm bolt) with -6 AN male flare.||$19.95|
|ATP-FTG-054||UNRESTRICTED Banjo style low profile -4 AN oil feed kit, incl. bolt, GT25 GT28 GTX28 GT30/35 GTX35||$24.95|
|ATP-FTG-055||Low profile -3 OIL FEED LINE Kit for GT25R through GT35R turbos (with 48" -3 line)||$49.00|
|GRT-GSK-005||Gasket, T3 Turbine Inlet - UNDIVIDED||$6.95|
|ATP-GSK-019||Gasket for T3 5 Bolt (Ford Style) Turbine Outlet Flange (Externally Gated)||$9.00|
|GRT-GSK-006||Gasket, T4 (T04) Turbine Inlet - UNDIVIDED||$8.00|
|ATP-GSK-015||Gasket, T3 Turbine Inlet, DIVIDED||$9.00|
|ATP-GSK-075||Stainless Steel Gasket - Garrett T3 Flanged, 5 bolt "GT", & Internally Gated Turbine Housing||$9.95|
|ATP-GSK-012||Gasket, "T31" 4 Bolt Turbine Discharge Downpipe Gasket aka 2.5" 4 bolt||$8.00|
|GRT-GSK-004||Gasket, T25/GT25 Turbine Inlet for GT25 GT28/GTX28||$6.95|
|ATP-GSK-016||Gasket, 5-Bolt for Garrett T25 Flanged GT28/30R-WG Turbine Housings||$6.95|
|ATP-GSK-014||Gasket, T4 (T04) Turbine Inlet - DIVIDED||$8.95|