Garrett GT3076R (aka GT30R aka GT3037) : atpturbo.com

Wastegates
Gaskets
Silicone & Rubber Connectors
Vacuum Routing
Pipes/Bends
Fasteners
Sensors
Flex Bellows
Flanges/Adapters
Fueling/Injectors
Clamps
Blow-Off Valves
Oil Supply
Fittings
Intercoolers
GT BB Install Parts
Vehicle Specific
Bargains/Clearance
Black Series Fittings

Home >> Catalog Home >> Accessories/Controls

Garrett GT3076R (aka GT30R aka GT3037)

Quantity in Basket: None
Code: GRT-TBO-005
Price: $1,358.00
Shipping Weight: 20.00 pounds

Turbine Housing A/R:

	.63 A/R
	.82 A/R
	1.06 A/R
	.78 A/R (only available on divided T3 housing selection)
	.72 A/R (only available on Special T25 EWG-44 housing selection)

Specify Turbine Housing Style:

3" V-band GT Option ADD-ON for the GT4bolt 3" Selection:

Optional Polished Housing:

Optional Compressor Housing with 3" Inlet:

Optional Compressor Housing with 3" Inlet Instead of default 4" inlet (also deletes ported shroud)

Quantity:

Dual Ball Bearing GT3076R Turbo assembly (Garrett P/N: 700382-5012) with turbine housing of your choice. T04E style compressor housing with 4.00 inlet and 2.00" outlet. Very Good response turbo for 4 Cyl applications. This turbo has a flow capacity of about over 500HP. This turbo would be the same as HKS GT3037. Standard (default) turbine housing is first one listed (T3 inlet with 3" 4 bolt "GT" conical discharge flange) and various other turbine housing options are available for easy retrofit into applications where your turbine housing type is already dictated by your current turbo. Please note: Turbine housing choice will determine final calculated cost of turbo in the shopping basket.

Turbine
-Wheel: 60mm w/ 84 trim
-Housing: .63 ar, .82 ar, 1.06 ar
-Maps

Compressor
-Wheel: 76.2mm w/ 56 trim
-Housing: .60 ar
-Maps

This unit is usually in stock and ships withing 1-2 days.

Related Item(s)

Code	Name	Price
ATP-FLA-010	Aluminum - Oil Drain Flange (GT/T25)	$15.00
ATP-WGT-009	Internal Wastegate Bracket	$25.00
GRT-GSK-008	Oil Return Gasket - GT Series	$3.00
ATP-FTG-003	Banjo Fitting Kit for coolant lines - 14mm Machined Alum to 1/4" NPT	$22.00
ATP-OIL-021	-4 size Oil inlet fitting for GT28/30/35R with built-in restrictor	$12.00
ATP-FTG-004	14mm Banjo Fitting Set for coolant lines - 3/8" Barb	$18.00
ATP-FTG-012	Fitting, Metric 14mm to 6AN, Male to Male (For coolant or oil)	$14.95
ATP-WGT-019	Internal Wastegate Actuator - Special 7 psi	$79.00
ATP-OIL-031	Alum 5 Degree Tilt Oil Drain Tube	$29.00
ATP-WGT-025	Wastegate Actuator 28RS style, 14 PSI	$79.00
ATP-FTG-029	-4 size Oil inlet fitting for T25/T28 or unrestricted GT25R/GT28R/GT30R/GT35R	$8.50
ATP-FTG-053	Banjo Fitting Kit, (1) Banjo fitting 14mm hole (for 14mm bolt) with -6 AN male flare	$29.90
ATP-FTG-052	Banjo Fitting, 14mm hole (for 14mm bolt) with -6 AN male flare.	$19.95
ATP-FTG-054	Banjo fitting 12mm hole with -4 AN male flare kit, including bolt and washers for GT25R through GT35	$29.90
ATP-FTG-055	Low profile -3 LINE Kit for GT25R through GT35R turbos (with 48" -3 line)	$49.00

Information

Company

| | |