Quantity in Basket:
Shipping Weight: 0.25 pounds
Stainless 3" downpipe weld flange with a protruded lip and 81mm diameter centering ring.
Designed for all Garrett turbine housings with a "GT" 3 Inch V-Band outlet flange.
Garrett GTX29, GT30, GTX30, GEN2 GTX30, GT35, GTX35, GEN2 GTX35, GTX84RS, GT40, and GTX40 series models are available with a Garrett turbine housing including a "GT" 3 Inch V-Band outlet flange.
* The Garrett "GT" 3 Inch V-band flange has a 81mm diameter recessed lip (inward groove).
* This flange includes a protruded lip and 81mm diameter centering ring which fits into the Garrett "GT" 3 Inch V-Band Flange.
* This flange has a 3.55" (90mm) diameter outer ring.
|CLC-CLA-048||CLAMP, V-Band DOWNPIPE SIDE 3" Garrett "GT V-Band" Turbine Housing w/ 90mm OD Flange GTX G25 G30 G35||$22.95|
|CLC-CLA-051||Stainless Downpipe Flange and Clamp set 3" GT V-band (w/Protruded 78mm lip at the ID) 90mm OD||$49.00|
|CLC-CLA-052||FLANGE AND CLAMP SET, Stainless Downpipe 3" GT V-band (w/ Protruded 81mm lip at the ID) 90mm OD||$49.00|
|ATP-HSG-044||Turbine Housing With T3 Undivided Inlet And 3" GT V-Band Exit||$464.92|
|ATP-HSG-045||Turbine Housing, T4 Undivided inlet 3" V-Band outlet, GT30R (GT/GTX3071R, GT/GTX3076R)||$464.92|
|ATP-HSG-046||Turbine Housing T4 Undivided inlet GT 3" V-Band out, GT35R(GT3582R) also any GTX35||$464.92|
|ATP-HSG-342||Garrett S.S. V-Band Inlet/Outlet 1.21 A/R Turbine Housing for GTX84RS||$483.99|
|ATP-HSG-222||Garrett *DIVIDED* V-band Entry Turbine Housing in Ni-Resist For GT30R/GTX30R 1.01 A/R||$600.34|
|ATP-HSG-041B||Add-on service operation to ATP-HSG-041 (or Others), 3" GTVB (90mm OD / 81mm lip) modification||$50.00|
Back to Top
All contents © 1997- Advanced Tuning Products, Inc. All rights reserved.