Quantity in Basket:
Shipping Weight: 0.10 pounds
Tapping the compressor housing for a boost pressure source just got easier...because you no longer have to do it!
A boost pressure source near the compressor housing is critical for proper boost control, however, removing the compressor housing from the turbo to tap it for a pressure signal fitting can be a real chore...especially when the turbo is already mounted to the engine.
Each QuickTap kit includes all parts necessary to easily create a reliable
boost pressure port on the first silicone connector out of the turbo compressor
outlet. Our QuickTap kit features 100% of the functionality and reliability
of a fitting on the compressor housing without the hassle of drilling and tapping
the housing itself.
Each kit includes:
1 CNC machined aluminum barb fitting with thread body and sealing surface
1 Stainless Steel washer
1 Stainless Steel Nut
1 Stainless Steel retainer clip
To use the Quicktap kit, simply punch a 5/16" (8mm) hole directly into
the silicone connector and install the fitting kit. This can be easily done
using an off-the-shelf hole puncher with a long throat. The product has been
thoroughly tested on the type of reinforced multi-layer silicone connectors
that we sell. The intricate design of the fitting assembly does not leak boost
or damage the silicone connector if used properly. The fitting assembly is also
designed to accomodate other similar silicone connectors on the market with
|ATP-FTG-040||Fitting, Pressure Port (boost nipple), 90 DEGREE , 1/8" NPT to 7/32" Barb Fitting||$5.52|
|ATP-FTG-198||Fitting, Pressure Port (boost nipple), STRAIGHT OUT , 1/8" NPT to 1/4" Barb Fitting||$3.95|
|ATP-SIL-126||1/4" (6.3mm) Extruded Silicone Vacuum Hose||$1.50|
|MIA-VCM-002||1/4" Three Way Hose Tee (Stainless Steel)||$4.00|
|ATP-SIL-246||3/16" (4.7mm) ID Extruded Silicone Vacuum Hose||$1.50|
Back to Top
All contents © 1997- Advanced Tuning Products, Inc. All rights reserved.