Quantity in Basket:
Shipping Weight: 1.50 pounds
1 flange and 1 clamp to mate to "GT style 3" v-band discharge on "GT" style turbine housing. Heavy Duty Stainless Steel V-Band Clamp and special Stainless 3" flange with protruded lip for GT V-band housings with lip on V-band. Also same (slightly smaller) outer diameter as GT V-band housing outer diameter. Only use this flange if you have a mating flange or housing that has a recessed ID for the protrusion on this flange to sit into.
Please Note: If your mating v-band flange does not have a recessed ID, please use a 3" v-band flange via P/N: ATP-FLS-012 or ATP-FLS-063.
|ATP-FLS-012||Flange, Standard 3" V-Band MILD STEEL (3.75" OD flange, Grooved for 3" OD Tube)||$15.95|
|ATP-FLS-063||Flange, Standard 3" V-Band STAINLESS STEEL (3.75" OD flange, Grooved for 3" OD Tube)||$19.95|
|ATP-FLS-105||Stainless 3" DOWNPIPE SIDE FLANGE w/ protruded lip for Garrett "GT" 3" V-band (3.55" / 90mm OD)||$26.00|
|ATP-HSG-216||Garrett Undivided V-band Entry Turbine Housing in Ni-Resist For GT30R/GTX30R 1.01 A/R||$561.72|
|ATP-HSG-217||Garrett Undivided V-band Entry Turbine Housing in Ni-Resist For GT35R/GTX35R 1.01 A/R||$561.72|
|ATP-HSG-218||Garrett Undivided V-band Entry Turbine Housing in Ni-Resist For GT35R/GTX35R .61 A/R||$561.72|
|ATP-HSG-044||Turbine Housing With T3 Undivided Inlet And 3" GT V-Band Exit||$464.92|
|ATP-HSG-046||Turbine Housing T4 Undivided inlet GT 3" V-Band out, GT35R(GT3582R) also any GTX35||$464.92|
|ATP-HSG-045||Turbine Housing, T4 Undivided inlet 3" V-Band outlet, GT30R (GT/GTX3071R, GT/GTX3076R)||$464.92|
|CLC-CLA-051||Stainless Downpipe Flange and Clamp set 3" GT V-band (w/Protruded 78mm lip at the ID) 90mm OD||$49.00|
|CLC-CLA-052||FLANGE AND CLAMP SET, Stainless Downpipe 3" GT V-band (w/ Protruded 81mm lip at the ID) 90mm OD||$49.00|
Back to Top
All contents © 1997- Advanced Tuning Products, Inc. All rights reserved.