Quantity in Basket:
Shipping Weight: 3.00 pounds
Garrett dual ball bearing GT4294R (aka GT42R) and GT4202R (aka GT42RS) turbochargers. The GT4294R (GT42R) is capable of 850hp and the GT4202R (GT42RS) is capable of 1,000hp.
Available in T4 (divided or undivided), T6 divided, or V-band Inlet turbine housings.
This unit is usually in stock and ships withing 1-2 days.
TURBINE HOUSING OPTIONS:
COOLANT (WATER) & OIL FITTINGS, FLANGES, AND COMPONENTS SOLUTIONS:
NOTE: Alternate coolant and oil fittings and flanges are available.
TURBINE HOUSING INSTALLATION COMPONENTS:
GT4294R (GT42R) COMPRESSOR AND TURBINE MAPS:
GT4202R (GT42RS) COMPRESSOR AND TURBINE MAPS:
APPLICABLE GARRETT PART NUMBERS:
* 451888-5011S (GT4202R)
* 451888-5009S (GT4294R)
|ATP-FLA-008||Aluminum - Oil Inlet Flange (T3, GT37, GT40, GT42, GT45, GT47, GTX50, GT55)||$15.00|
|ATP-FLA-009||Aluminum - Oil Drain (Return) Flange T3 /T4, GT37, GT40, GT42, GTX42, GTX45||$13.95|
|CLC-CLA-014||V-Band Clamp - 4" - For 4.75" OD Flanges||$19.95|
|GRT-GSK-007||Oil Drain ( Return ) Flange Gasket (T3, GT37, GT40, GT42, GT45, GTX40, GTX42, GTX45)||$1.65|
|ATP-OIL-022||Oil Inlet Restrictor - .065" hole size 1/8" NPT (for Journal bearing and larger GT BB)||$12.00|
|GRT-GSK-011||Oil inlet feed flange Gasket - Feed Flange (T3, GT37, GT40, GT42, GT45, GT47, GTX50, GTX55)||$3.00|
|ATP-FLS-031||Flange, 4" V-Band MILD STEEL (4.75" OD flange, Grooved for 4" OD Tube)||$22.00|
|ATP-FTG-014||Fitting, Metric 18mm to 6AN, Male to Male (For coolant, fuel, or oil)||$14.95|
|ATP-FTG-006||18mm Banjo Fitting Kit for Coolant Connections on GT40R/GT42R||$24.00|
|ATP-FLS-055||3.5" V-Band Flange & Clamp Set - Comp. Outlet - GT42, GTX42, GT45, GTX45, GT47, GTX47, GTX50 GTX55..||$44.95|
|ATP-FLS-064||Flange, 4" V-Band STAINLESS STEEL (4.75" OD flange, Grooved for 4" OD Tube)||$24.00|
|ATP-FLS-086||4" V-band Flange/clamp SET Flat Machined MILD STEEL (4.75" OD Flanges / Grooved for 4" Tube)||$49.00|
|ATP-GSK-014||Gasket, T4 (T04) Turbine Inlet - DIVIDED||$8.95|
|GRT-GSK-006||Gasket, T4 (T04) Turbine Inlet - UNDIVIDED||$8.00|
|ATP-GSK-020||Gasket, T6 Turbine Inlet, DIVIDED GT42 GTX42 GT45 GTX45 GT47 GTX47||$12.00|
|ATP-FLA-024||Oil Drain (Return) Flange with -10 Male Flare (T3, GT37, GT40, GT42, GT45, GTX40 GTX45)||$19.95|
|ATP-FLA-025||Oil Drain (Return) Flange with 5/8" slip-on Barb (T3, GT37, GT40, GT42, GT45, GTX42 GTX45)||$19.00|
|ATP-FLA-030||Oil Drain (Return) Flange (LONG Ver.) with -10 Male Flare (T3, GT37, GT40, GT42, GT45 GTX42 GTX45)||$29.00|
Back to Top
All contents © 1997- Advanced Tuning Products, Inc. All rights reserved.