INQUIRE TO RESELL
Quantity in Basket:
Shipping Weight: 0.10 pounds
Image of the Barbed Fitting Kit installed on the coolant port of a Garrett Turbocharger
Banjo fitting kit for coolant (water) ports on Garrett ball bearing GT25, GT28, GTX28, GTX29, GT30, GTX30, GT35 and GTX35 series turbochargers. Also compatible with Garrett ball bearing GTW34, GTW36, and GTW38 series turbochargers.
14mm Banjo to 3/8" (10mm) Hose Barb. Shaft length (end of banjo eye to barb end): 35mm.
|ATP-FTG-003||Banjo Fitting Kit for coolant lines - 14mm Machined Alum to 1/4" NPT||$22.00|
|ATP-FTG-002||Banjo Fitting - 14mm banjo to 1/4" NPT (Banjo Only)||$14.00|
|ATP-FTG-012||Fitting, Metric 14mm to 6AN, Male to Male (For coolant or oil)||$14.95|
|ATP-FTG-025||3/8" (10mm) Hose, Black, Re-inforced Rubber, 300psi, 3/8" barb or -6 pushlock||$6.95|
|ATP-FTG-050||Banjo Bolt, 14mm x 1.5 pitch w/ 2 crush washers||$9.95|
|ATP-FTG-053||Banjo Fitting Kit, (1) ALUM Banjo fitting 14mm hole (for 14mm bolt) with -6 AN male flare||$29.90|
|ATP-FTG-052||ALUM Banjo Fitting, 14mm hole (for 14mm bolt) with -6 AN male flare.||$19.95|
|ATP-FTG-155||Banjo Fitting Kit - 14mm With 3/8" Pushlock||$14.95|